Parts

- Missing links to make chain installation, maintenance and reparation easier - Reusable up to 3 times - Compatible with 6, 7 and 8 speed IG drivetrains - Pin width: 7.1mm - Card of 2

Saddle clamp heads and lowers for KS Dropper posts.

KS Dropper Post Service Parts

When you can’t even see a part, you might forget about it, but it doesn’t mean its not important. Flat tires are probably the most common bicycle failures. Many times, flats are caused by the rims, specifically the lack of protection from the rims' sharp edges. Good rim strips didn’t exist for BMX rims. They work well and improve the function of any 20 inch rim. If you forget about them, that means they are doing their job.

Hardware is specifically designed for, and only compatible with, Salsa frames using the Alternator 2.0 dropout system. - For use on 2017 and newer alternator 2.0 Adjustable plates only - Please reference hardware kit FS2351 for fixed position plates - Please reference hardware kit FS2350 for adjustable plates

Frame Plugs for Internal Cable Routing

- Parts listed are for servicing and overhauling a single master cylinder/lever assembly

Alternator 1.0 Set Screws

- 3-spline steel cogs for use with Sturmey 3-speed (and 5-speed) internal gear rear hubs - Flat or dished for tuning chainline. Xylan coating for greater durability

CAMO Chainring Bolt Kit are designed specifically for use with CAMO spiders and rings - Includes 5 Torx head M5 x 8mm bolts - ED coated steel is durable - Bolts include a blue Nylok patch for a secure installation - Torque bolts only to 4-5 Nm and use blue Loctite threadlock

CAMO Chainring Bolt Kit are designed specifically for use with CAMO spiders and rings - Includes 5 Torx head M5 x 8mm bolts - ED coated steel is durable - Bolts include a blue Nylok patch for a secure installation - Torque bolts only to 4-5 Nm and use blue Loctite threadlock

Saddle clamp heads and lowers for KS Dropper posts.

Parts for the service of the seal and restore the smooth cycling of KS dropper posts.

Parts for the service of the seal and restore the smooth cycling of KS dropper posts.

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

Parts for the service of the seal and restore the smooth cycling of KS dropper posts.

Parts for the service of the seal and restore the smooth cycling of KS dropper posts.

- Grade 10 chromium steel balls

Odyssey A Brake shoes for all your braking needs.

The M2 lever works with a single cable or Odyssey's dual cable system. - Improved braking power for Gyro users - Left/Right hand compatible

Bolts for attaching sprocket to the crank arm.

Replacement hardware kit for Salsa Alternator Flat Mount dropouts. - For use only on frames designed for the Alternator Flat Mount standard

Made of Stolen's proprietary Thermalite material, the sleeve resists cracking and deformation while sliding better than chromoly on most surfaces. These sleeves come stock on the Stolen Silencer & Fiction Troop pegs and will also fit over our chromoly Barrel Peg (with axle washer). - Length: 4.4-inch - Diameter: 1.6-inch - Material: Plastic (Thermalite) - Weight: 0.8- ounce each - Replacement sleeve only - Sold individually

KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with KMC and Shimano 10-speed chains - Includes 2 pairs

Flat Mount Disc Caliper Bracket Bolts

SRAM's Handlebar End Plugs are just the thing for adding a fun, custom touch to your handlebar taping job. They feature SRAM's famous and stylish "Make the Leap" frog logo.

SRAM's Handlebar End Plugs are just the thing for adding a fun, custom touch to your handlebar taping job. They feature SRAM's famous and stylish S logo.

M8 Capless Crank Arm Bolt Kit - For square-taper & Powerspline

- Front or rear brake - MTB specific - 1.5mm stainless cable

Stainless steel cables are extruded to provide a smooth, low-friction surface.

- Left and right shifter compatible - Road and MTB compatible - 1.1mm polished stainless steel cable

Chainstay protectors to guard your Salsa frame from scratches and damage.

KS Dropper Post Service Parts

KS Dropper Post Service Parts

Saddle clamp heads and lowers for KS Dropper posts.

Saddle clamp heads and lowers for KS Dropper posts.

Saddle clamp heads and lowers for KS Dropper posts.

Shimano compatible road caliper brake pads from Bontrager. Genuine replacement parts Reliable Bontrager stopping power for optimal operation and safety. - Sleek brake pads and cartridges are Shimano compatible - British Standard Compound (BS)—Long wearing pad compound - Exceeds all US standards for brake pads—Sticky rubber for improved braking - Sold in pairs

Brake Pad Spreader Springs - Available for Guide Ultimate and Guide X0 brakes

SRAM Racing Grips offer a great grip for total control and come in several sizes to fit your front-end setup. These durable rubber grips have stylish logos stamped in them and are built to last and not slip.

X01 Eagle Cable Anchor Kit

Actuators are at the bottom of the post and convert the cable pull to open the piston, allowing the dropper to move.

- Plastic clip prevents pistons from pressing in while wheel is off of the bike - Fits: Marta, Louise, Clara, Julie

Pre-cut traction tabs designed to integrate with the Highline remote lever and increase grip for ultimate control.

Dimension Classic Cruiser Grips available in black and white. - Flange: No - Grip Shift Specific: No - Length: 140mm - Lock On: No - Shape: Round - Weight: 104g

Heavy duty bolt-on aluminum seatpost clamp.

Dimension Seatpost Binder Bolts - 16g

Dimension Steel Cogs are splined for BMX and singlespeed hub compatibility. - Steel with chrome finish - Cogs are splined for Shimano BMX and singlespeed hub compatibility - Compatible with 1/2-inch and 1/8-inch chains

- Lower cables for Odyssey's Gyro G3 (sold separately). - Universal fit. - Lower cables only.

- Upper cables for Odyssey's Gyro G3 (sold separately) - Universal fit. - Upper cables only.

Replacement parts for Paul rim brakes.

SRAM's Cable Housing/Hydraulic Line Rotating Hooks secure your cable housings to hold them the way you want them, keep them from hitting each other, and making rattling noises, and they provide a tidy custom look, too.

Parts for the service of the seal and restore the smooth cycling of KS dropper posts.

Parts for the service of the seal and restore the smooth cycling of KS dropper posts.

Complete remotes and remote components for KS dropper posts.

Parts for the service of the seal and restore the smooth cycling of KS dropper posts.

Replacement derailleur hanger screws for Syntace X-12 system.

Keep adhesives off your bike! This is the finishing tape included in our RCT Wrap Kits. If you remove the protective backing and feel the material it feels exactly the same on both sides. There are no adhesives! If you touch it to itself you have just a few seconds to peel it away before it starts to bond. It bonds to itself or to our silicone grips, but not to your bike or to your components. No more cleanups. No more nasty glue stuck all over your bike or products. BENEFITS: ESI Silicone Tape has some of the same benefits as our grips. It is heat resistant, made in the USA, and long-lasting. Not to mention it's military-grade! - Easy to Install - Hassle Free - Self-Bonding - No Residue - No Adhesives - UV Resistant NO CLEAN UP: The best part of our tape is when you are done with it, cut it off, and throw it away. No Clean up needed! USES: There are countless uses for our silicone tape. One awesome use is it makes a great chainstay protector. Also, wrap it under mounts to keep your lights, cameras, GPS, etc. from rotating and scratching your bars. Basically, anything you use adhesive/electrical tape on you can now use ESI Silicone Tape instead without the mess. With 10ft in a roll, you can get numerous chain stay protectors and custom tape jobs. Some other great uses include: - Tool Handles - Finishing Tape - Protecting Wear Points - And Much More The possibilities are endless!

Experience what so many cyclists are using, the Logo grip. It satisfies many riders providing durability. This is a great grip for those with medium-sized hands. Single compound grip includes push in plugs. - Length: 130 mm - Weight (with plugs): 109 grams - Diameter: 31.75 mm

The Gost pads feature a unique design to make install and set up easier. - Improved stiffness by built in toe-in into the pad shape and using a solid extruded aluminum frame - Assembly is simplified by lining up the rim and tightening a M6 female bolt