Filter By:
- Bar Ends (1)
- BMX (10)
- Bottom Brackets (14)
- Brakes/Levers/Pads (54)
- Cables (6)
- Cassettes/Freewheels (17)
- Chainrings (17)
- Chains (25)
- Show More Categories
- Cranksets (4)
- Derailleurs (8)
- Handlebar Grips/Tape (74)
- Handlebars (10)
- Headsets (11)
- Pedals (25)
- Saddles (8)
- Seatposts (6)
- Shifters (31)
- Stems (13)
- Other (135)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Parts
$24.99
Kit Includes premium components:
- Inner cartridge bearing x 2
- Outer cartridge bearing x 2
- Igus solid bearing x 2
- Inner seal x 2
- Bearing locknut x 2
- Spindle screw (Left) x 1
- Spindle screw (Right) x 1
$24.99 - $34.99
Dimension Chainrings.
- No ramps, pins, or shift aids
$24.99
Our largest most shock absorbing grips!
Fatty’s have plush 8 pillows to optimize shock absorption and grip!
- Fits most handlebars
- Made from 100% Silicone
- Latex & Rubber Free
- Made in the USA
- 35mm thickness
- Made for 22mm bars (can fit applications down to 19mm)
- Bar Plugs included
*Install Bar Plugs first for the protection of grips and ease of installation
$24.99
Chunky XL 6.75” are over 30% longer than standard grips!
- Made for 22mm bars (can fit applications down to 19mm)
- Bar Plugs included
- *Install Bar Plugs first for the protection of grips and ease of installation
$24.99
- Allows a customer to replace their cleats.
- Two replacement cleats in box
$24.99
The microSHIFT Trail Trigger features ergonomic and performance benefits but without the silicone gripper pad. This shifter is well-suited for riders with exceptionally tough thumbs who ride in dry conditions.
- Compatible with microSHIFT ADVENT X 10-speed drivetrains only
- Internal cartridge bearings for light lever throw and positive actuation under load
- Precise ergonomics put the shift lever where you want them
$24.99 - $25.99
MicroSHIFT's H10 cassettes are manufactured to exacting tolerances for straightness, shift quality, and durability, resulting in responsive shifting performance that lasts longer than you might expect.
- Sprockets are chrome-plated for hardness and corrosion resistance
- Continuously molded cogs are straighter than stamped steel, resulting in more consistent, predictable shifting performance
- Precision ramps and chamfers for rapid chain movement
- Compatible with SRAM and Shimano 10-speed systems
- Steel lock ring
Gear combinations:
- 11-25T: 11-12-13-14-15-17-19-21-23-25
- 11-28T: 11-12-13-14-15-17-19-21-24-28
- 11-32T: 11-12-13-15-17-19-21-24-28-32
- 11-34T: 11-12-13-15-17-19-21-24-28-34
- 11-36T: 11-13-15-17-19-21-24-28-32-36
$24.99
M-series rear derailleurs are designed to work with 7, 8, and 9-speed Shimano-compatible mountain and road shifters. Marvo LT rear derailleurs are built with precision rigid aluminum construction. Let these miracle workers get any bike rolling again.
- Lightweight aluminum construction
- Steel pulley cage for extra chain-rub durability
- Compatible with Shimano 7, 8, and 9-speed mountain and road systems
$24.99
New dust cap design, with Monogram laser etched logo, for a cleaner look to accommodate a taller riding set up with less spacers. Same quality as Odyssey's Pro Headset using high-quality sealed bearings and a precision tapered wedge to keep the headset tight at all times.
FEATURES
- High-quality sealed bearings.
- Color matched spacers included.
- 15mm dust cap. With 3mm, and 2mm spacers
- Laser etched Odyssey bearings.
SPECS
- Campagnolo standard spec.
- 1 1/8-inch integrated headset.
- 45º tapered bearings
- 41.8mm outer diameter (fits 42mm BMX head tubes).
$24.99
Designed specifically for use with Odyssey's Quartet FRONT or REAR hubs.
SPECS
- Forged from 7075-T6 aluminum for greater strength and durability
- Steel insert prevents guard deformation, prolonging bearing life
$24.99
- Embossed top cover
- Plastic bumpers
- Pivotal system
- Clamp Style: Pivotal
- Material: Vinyl
$24.99
- A totally new grip designed from the ground up to give you more control and comfort then ever before!
- Single lock ring design and smooth thumb zone.
- Reinforced bar end area
- Anatomical bar end design supports and protects the little finger
- Cut outs improve impulse shock, vibration absorption and comfort
- Interlocking columns support low profile fins to create a tread pattern which offers the benefits of both a finned grip and a low profile
- Features: Single lock grip, low profile 30mm diameter, tapered bar ends, Spank 'Human Factor' grip pattern.
- Material: Rubber, alloy clamp, plastic base, steel bolt
- Length (mm): 145
- Diameter (mm): 30
- Weight (g): ±115g / Pair
$24.99
- A totally new grip designed from the ground up to give you more control and comfort then ever before!
- Single lock ring design and smooth thumb zone.
- Reinforced bar end area
- Anatomical bar end design supports and protects the little finger
- Cut outs improve impulse shock, vibration absorption and comfort
- Interlocking columns support low profile fins to create a tread pattern which offers the benefits of both a finned grip and a low profile
- Features: Single lock grip, low profile 30mm diameter, tapered bar ends, Spank 'Human Factor' grip pattern.
- Material: Rubber, alloy clamp, plastic base, steel bolt
- Length (mm): 145
- Diameter (mm): 33
- Weight (g): ±115g / Pair
$24.99
Fits 19mm team & talon cranks:
- Splines: 48
- Diameter 19mm
- Length: 5.5" (140mm)
- Spindle bolts: 3/8" X24tpi (not included)
- Also fits: Cult OS, Demolition Revolt, Rant 48-S, WTP Royal, Redline Device and other 19mm 48 spline cranks
$24.99
Get back on the trail with a quality replacement hanger.
- Original equipment replacement rear derailleur hangers
- Attachment hardware is sold separately
Specifications:
- Size: Rear drive side, 148x12mm Thru Axle
- Mounting location: Rear drive side
- Attachment: Thru axle nut
$25.00
A perfect complement to your ENVE cockpit and fork. The ENVE compression plug keeps your ride straight as an arrow and looking good.
$25.00
The KMC X-Series has been designed with the specific characteristics of the Shimano, SRAM, and Campagnolo systems in mind and will meet the most demanding requirements. Elaborately designed and manufactured, the X-Bridge technology, thanks to precisely chamfered plates, allows a smooth propulsion and perfect gear changes in all driving situations.
- Size: 1/2"x11/128"
- Length: 116 Links
- Weight: 273 grams
$25.00
- Stretch-proof, super-narrow chain for use with 10-speed Campagnolo/Shimano/SRAM
- Use: Mountain/Road
- Size: 11/128-inch
- Width: 5.9mm
- Weight: 273 grams
- 116 links
$25.00
- X9SL: superlight chain for use with 9-speed, 252g
- X9.93: upgraded version of the Z-9000 chain stretchproof, super-narrow chain for use with 9-speed
- Pink Lady chains are a limited edition with 15% of sales going directly to the Pink Ribbon Foundation
- Width = 11/128-inch
$25.00
North Shore Billet Derailleur Hangers
- All hangers are CNC machined from 6061 T6 Aluminum for strength and stiffness beyond OEM hangers
- Protective anodized pewter finish
- Hardware not included
$25.00
SRAM's 3.0 Twist Shifters are simple to use and offer solid shifting and reliable construction. Using SRAM's 1:1 actuation ratio technology, the 3.0s are easy to set up and easy to adjust. Plus, with a simple twist of the wrist, you can shift a handful of gears at once.
$25.00
Designed for use with T-Type chains, the Eagle Transmission PowerLock provides the same rugged dependability as its predecessors.
- For use with T-Type chains
- No tools required for installation
$25.00
SRAM’s 10-speed chain is compatible with all industry-standard 10-speed systems. And, with its great PowerLock connecting link, installation is a snap.
$25.00
SRAM road disc brake pads are designed for use with SRAM road hydraulic disc brakes (HRD).
- For use with Level Ultimate & Level TLM Brakes
- Pad Material: Organic
- Type: Road/CX
- Includes guide pin, clip, & pad spreader
$25.31
Actuators are at the bottom of the post and convert the cable pull to open the piston, allowing the dropper to move.
$25.99
For cross country and all-mountain riding, Dimension Mountain bars provide generous—but not ridiculous—width, rigorously tested to ISO 4210 Mountain standards.
- Shot-peened finish
- 6061-T6 Aluminum
- 9-deg backsweep
- 720mm wide
- 35mm rise
$25.99
Tom likes to ride fast and go very high. These tires were designed to help him do just that. With a fast center tread, these tires are made for park, street and even dirt too. The side profile is reminiscent of a motorcycle tire as well, which is a nod to Tom’s motorcycle lovin’ ways.
$25.99
The Sunday Sabretooth V2 sprocket is a 6mm (1/4?) thick 6061-T6 aluminum sprocket.
$26.00
Dimension Mountain Compe Pedals.
- Forged aluminum body
- Accepts toe clips
- Pedal Body Material: Aluminum
- Pedal Spindle: 9/16-inch
- Pedal Type: Toe Clip Compatible
- Spindle Material: Chromoly Steel
- Weight: 335g
$26.00
Service your suspension fork with the Enduro HyGlide Fork Seal Kit. HyGlide seals utilize the material and design advantages of our two-part seals (Polyurethane wipers and Moly-Disulphide-infused oil seals) and combine them into a single wiper/oil seal. This unique design joins the oil seal and wiper into a single unit, creating a sealing system that eliminates one of the sealing lips and decreases seal friction or “stiction” by 25%. The cold-fused integrated seal design also features a large oil cavity between the two sealing lips to prevent contamination and further ease fork's movement.
- HyGlide seal superior sealing action and can increase fork service intervals by as much as 2 or 3 times compared to OE recommendations