Accessories

Cutting edge aerodynamic and lightweight mount 3D Printed in Titanium compatible with all Garmin and Wahoo computers (except bolt v1). T-Tray mounting system makes for a removable mount for lights, cameras, and more! - Standard: 9 – 30mm - Wide: 23 – 40mm

Years ago while Josh was working with the Team CSC at the Dauphine Libere, he noticed one of their mechanics using the most amazing little chuck to manage the disc wheel inflation. Unlike anything he had seen before, it was all metal and used a 'lollipop' lever on the side to lock onto the valve stems in disc wheels. The mechanic explained that these were made in Japan and were coveted by all the Euro-Pro mechanics due to their scarcity. So Josh set out to improve the design and make it available to cyclists everywhere. - Full metal construction, guaranteed for 25 years and covered by SILCAShield - Can effectively seal on valve stems as short as 10mm! - Uses SILCA 254 High-Tech Elastomer gasket - Adjustable gasket pre-load allows for a custom fit on any valve as well as compensation for gasket wear - Male Schrader thread fits into any Schrader chuck, or use SILCA Thread-On Schrader Adapter to fit a bare hose - Bullet-proof high-pressure, disc-compatible chuck for high-pressure situations.

If you have a SILCA PISTA made since 1946, a SUPERPISTA since 1989, or any of the Impero Frame Pumps since 2015, it has a check valve assembly like this to ensure that air can only go in one direction

The Italian Army Knife, a very SILCA take on the traditional multi-tool. We've addressed the things that frustrate us with conventional multi-tools, while keeping the layout that fits conveniently in the SILCA EOLO Wallet or MATTONE. The mid-length tool design is long enough to provide access to recessed fasteners, but short enough not to experience twist or damage under moderate torque as can happen on longer tools. All tools are forged rather than bent from hex stock. While this method of construction is more expensive, the value is unquestioned during a road-side repair. Mid-length tools also allow us to position the tools within the same plane, reducing the thickness of the overall package by half. Double-chromed tools and fully stainless steel hardware and bushings guarantee a long life without corrosion (the number 1 killer of multi-tools is corrosion). Forged aluminum sidebars contain rare-earth magnets for holding a spare chain connector. - Forged and machined sidebars with integrated chain-connector storage. - Nove (No-vay) 9 forged and plated tools: Hex 2/3/4/5/6/8 +Torx 25 +PH2/Flat - 8mm adapter connects to the 5mm hex for optimal use of space. - Stainless steel pivot hardware - NOVE- 79 grams

The Italian Army Knife, a very SILCA take on the traditional multi-tool. We've addressed the things that frustrate us with conventional multi-tools, while keeping the layout that fits conveniently in the SILCA EOLO Wallet or Seat Roll Premio. The mid-length tool design is long enough to provide access to recessed fasteners, but short enough not to experience twist or damage under moderate torque as can happen on longer tools. All tools are forged rather than bent from hex stock. While this method of construction is more expensive, the value is unquestioned during a road-side repair. Mid-length tools also allow us to position the tools within the same plane, reducing the thickness of the overall package by half. Double-chromed tools and fully stainless steel hardware and bushings guarantee a long life without corrosion (the number 1 killer of multi-tools is corrosion). Forged aluminum sidebars contain rare-earth magnets for holding a spare chain connector. - Forged and machined sidebars with integrated chain-connector storage. - Tredici (Tre-dee-chee) 13 forged and plated tools: Hex 2/2.5/3/4/5/6/8 + Torx 10/20/25 + PH2/Flat + DiscPadSpreader. - 8mm adapter connects to the 5mm hex for optimal use of space. - Stainless steel pivot hardware - 98 grams

n partnership with the rubber and tire experts at Continental , we are offering a custom extruded 3/16" ID air hose compatible with all historic PISTA Handles.

Seat Roll Asymmetrico takes everything we've learned in 5 years of producing the award-winning Seat Roll Premio and kicks it up a notch with lighter materials, reduced bulk, improved abrasion resistance, an extra pocket, and a unique asymmetric design which allows you to pack more into a smaller volume, oh, and room for up to 700x45 (29x1.75") tubes! - 2-Ply Ballistic Nylon Construction with Hypalon outer jacket - Boa L6 Closure System with Lace Guide - Padded Rail Guard protects saddle rails and speeds Installation - FOUR internal pockets: Holds tubes up to 700x45mm - Black reflective printing provide stealthy HI-VIS in low-light conditions - Weight: 85 grams

With specifications more akin to a suspension fork than a traditional pump, the SuperPista combines a full metal shock piston design with the classic Italian leather plunger washer and self-lubricating linear bearings to create the highest-efficiency, smoothest-running SuperPista to date. Efficient, accurate, durable are the trademarks of the SuperPista floor pump. - High-mount digital gauge accurate to 1% with backlight, adjustable pressure alarm, and adjustable pressure units (uses two CR2032 batteries) - Full-size Ash wood handle with a secure carrier strap - High-efficiency 28mm SILCA leather piston assembly - Brass air check-valve assembly - Alloy barrel with plated steel piston shaft - Long filler hose with integrated Schrader chuck - Hiro locking-lever Presta chuck with a magnetic dock - Rated to 220psi

This chuck comes from the same vendor who supplied them to SILCA pumps for more than 25 years. It makes a great replacement or addition if you are buying a new Stainless Presta chuck or CP1 Disc Adapter for your older pump. This part is made from nickel-plated brass and uses an o-ring to seal the connection. - Hose barb fits into all SILCA hoses both old and new - Threads onto Schrader valves and all SILCA chucks with male Schrader threads (17-4 Presta chuck, HIRO, and CP1 Disc Adapter) - All metal construction, nickel-plated brass

Connect your PC to CycleOps VirtualTraining.

The Alternator Rack 190 is the rear rack solution for all Salsa 190mm-spaced Alternator dropout equipped frames. Load up your panniers, get off the beaten track, and start exploring! - NOTE: Deck requires a minimum of 320mm clearance from seatstay mounting points - NOTE: Salsa Rack-Lock needed for frames without upper seatstay mounts - Tubular AL-6061-T6 construction - 135 x 325mm cupped deck - Extra-long struts for improved range of fit. Straight and shaped (kinked) struts included - Large pannier hook stops - Black powdercoat finish - 15kg maximum recommended load - Mounting kit included - 765g

The Alternator 135 Low Deck fits Salsa 135mm-spaced, Alternator dropout equipped frames using a non-plus-sized tire. It features a lower and narrower deck that fits better over and around tires up to 29 x 2.1" (without fenders), as well as 700c and fender setups. - NOTE: Deck requires a minimum of 320mm clearance from seatstay mounting points - NOTE: Salsa Rack-Lock needed for frames without upper seatstay mounts - Tubular 6061-T6 aluminum construction - 135 x 345mm cupped deck - Extra-long struts for improved range of fit; straight and shaped (kinked) struts included - Black powder coat finish - 765 grams - Weight Limit (lbs): 59.5 lbs.

Set out on an adventure with Salsa's Alternator Rear Rack. Built for 135mm-spaced dropouts, this rack is constructed of sturdy, light 6061 aluminum and finished with a black powder coat. The Alternator features large pannier hook stops, extra long struts for an impressive fit range and it includes a mounting kit.

Set out on an adventure with Salsa's Alternator Rack. Built for 170mm-spaced dropouts, this rack is constructed of sturdy, light 6061 aluminum and finished with a black powder coat. The Alternator features large pannier hook stops, extra long struts for an impressive fit range and it includes a mounting kit.

The Anything Bracket Pack is specifically designed for use with our Anything Bracket and Anything Bracket Mini, but you can also strap it around your seat rails and use it as a seat bag to hold a tube, CO2, multi-tool, or anything else you want to stash in there. - Constructed of 200D nylon - Mounts to Anything Bracket, Anything Bracket Mini or saddle rails - Roll-top closure - Includes strap - Weight: 50g

Designed with minimalist riding in mind, the Anything Bracket mounts to standard or Three-Pack frame bosses and works directly with the Anything Pack, allowing you to carry essential items on the bike. - Combines placement of the Anything Pack and standard water bottle cage in a single location - Mounts to standard or Three-Pack bosses on forks and frames - Bracket is constructed of lightweight 6061-T6 aluminum - Includes Anything Pack, mounting hardware and strap - Anything Pack features a roll-top closure for easy access

• Tubular 6061-T6 aluminum construction • Three-position mid-blade mount for improved fit • Large pannier hook stops • Powdercoat finish • Maximum recommended load 33lbs (15kg) • Requires inner and outer mid-blade eyelets

The Down Under HD Rack is the recommended lowrider for world touring. Sturdy and dependable, the steel construction lends itself well to field repairs should a worst-case scenario occur. - Requires dual-sided, mid-blade mounts - Wide crossbars provide sturdy, secure attachment points for a pannier - Tubular 4130 CroMoly construction - Mounting system provides 35mm range of infinite adjustment to position the rack - Includes mounting hardware kit - Powdercoat finish - Maximum Recommended Load: 55lbs (25kg) - Sold in pairs - Requires inner and outer mid-blade eyelets

The Salsa EXP Series 35.0 Anything Cradle Arms are for mounting the Salsa EXP Series Anything Cradle (sold separately) to handlebars with a 35.0mm or 31.8mm clamp diameter. - Compatible with 35.0mm bars or 31.8mm bars (with included shims) - Compatible with all Salsa EXP Series Anything Cradles - Hinged clamps allow for easy installation and removal from handlebars - Made of 6061 forged aluminum

The Salsa EXP Series Anything Cage Bag is designed to hold your gear on the Salsa Anything Cage and Anything Cage HD mounting systems. This bag protects contents from the elements while keeping weight low to the ground. - Designed to fit Salsa Anything Cage and Anything Cage HD (sold separately) - Quick-release roll-top closure for easy accessibility - Two Hypalon daisy chains for multiple secure attachment points - Molded TPU base helps keep bag upright even when off the bike - Primary Material: 400D Nylon with TPU Base - Weight: 128g

The Salsa EXP Series Anything Cradle is a bracket-mount handlebar roll system that holds gear in front of your handlebars without kinking your cables. This modular system is designed for use with our EXP Series Side-Load or Top-Load Dry Bags, or you can use your own dry bag. The Anything Cradle allows you to distribute your gear evenly, which is essential to any well-balanced bikepacking setup. - Includes Anything Cradle and two 30" Salsa EXP Series Rubber Straps - Salsa EXP Series Rubber Straps are made of non-slip TPU to hold gear securely - Anything Cradle Arms are compatible with 35.0mm handlebars or 31.8mm handlebars (with included shim) - Nylon 6/6 composite cradle, 6061 forged aluminum arms - Maximum load weight: 8 lbs. (3.6kg)

The Salsa EXP Series Anything Cradle is a bracket-mount handlebar roll system that holds gear in front of your handlebars without kinking your cables. This modular system is designed around our EXP Series Side-Load Dry Bag, which maintains a fixed height for loading with ease, or you can use your own dry bag. The Anything Cradle allows you to distribute your gear evenly—an essential part of any well-balanced bikepacking setup. - Kit includes Anything Cradle, Side-Load Dry Bag, EXP Series Front Pouch, and two 30" Salsa EXP Series Rubber Straps - EXP Series Anything Cradle Side-Load Dry Bag is fixed-height for easy loading - Salsa EXP Series Rubber Straps are made of non-slip TPU to hold gear securely - Works with or without EXP Series Anything Cradle Front Pouch - Anything Cradle Dry Bags feature a welded seam construction with waterproof materials and hook-and-loop straps for easier installation - Anything Cradle Front Pouch uses water-resistant fabric with welded seams for weather protection - Anything Cradle Arms are compatible with 35.0mm handlebars or 31.8mm handlebars (with included shim) - Nylon 6/6 composite cradle, 6061 forged aluminum arms - Maximum load weight: 8 lbs. (3.6kg)

The Salsa EXP Series Anything Cradle is a bracket-mount handlebar roll system that holds gear in front of your handlebars without kinking your cables. This modular system is designed around our EXP Series Top-Load Dry Bag, which maintains a fixed width for loading with ease, or you can use your own dry bag. The Anything Cradle allows you to distribute your gear evenly—an essential part of any well-balanced bikepacking setup. - Kit includes Anything Cradle, Top-Load Dry Bag, EXP Series Front Pouch, and two 30" Salsa EXP Series Rubber Straps - EXP Series Anything Cradle Top-Load Dry Bag is fixed-width for easy loading - Salsa EXP Series Rubber Straps are made of non-slip TPU to hold gear securely - Works with or without EXP Series Anything Cradle Front Pouch - Anything Cradle Dry Bags feature a welded seam construction with waterproof materials and hook-and-loop straps for easier installation - Anything Cradle Front Pouch uses water-resistant fabric with welded seams for weather protection - Anything Cradle Arms are compatible with 35.0mm handlebars or 31.8mm handlebars (with included shim) - Nylon 6/6 composite cradle, 6061 forged aluminum arms - Maximum load weight: 8 lbs. (3.6kg)

The EXP Series Frame pack creates storage capacity in the main triangle of your frame, keeping weight centered, and gear out of the way of off-road obstacles. It's built with extremely durable fabric and zippers, and the result will see you through many miles, and many adventures. This frame pack is designed to fit the Cutthroat frame perfectly. - Weather resistant with fully welded-in #10 YKK waterproof zippers - Internal hook and loop divider for separating gear and managing storage - D-ring to keep water bladder from compressing itself in the bottom of the bag - Exit port along downtube for use with water bladder or lights - Non-driveside flat pocket for storage of maps, tools, phones, wallet, etc. - 500D Nylon with TPU lamination and PU coating, 1000D Polyester with dual sided TPU lamination, #10 waterproof YKK Zippers, Duraflex Hardware - XL Weight: 360g; Volume: 6.1L - L Weight: 320g; Volume: 5.2L - M Weight: 300g; Volume: 4.5L - S Weight: 260g; Volume: 3.5L

The EXP Series Direct Mount Thumb Screws allow for quick and easy attachment of Salsa EXP Series Direct Mount Packs to bicycle frames equipped with direct-mount locations. - Can be installed and removed by hand or with allen key - Includes necessary 0.5 mm washers and 4 mm spacers - Sold in packages of two

The EXP Series Fat Framepack creates storage capacity in the main triangle of your frame, keeping weight centered, and gear out of the way of off-road obstacles. It's built with extremely durable fabric and zippers, and the result will see you through many miles, and many adventures. - Weather resistant with fully welded-in #10 YKK waterproof zippers - Internal hook and loop divider for separating gear and managing storage - Exit port along downtube for use with water bladder or lights - Non-driveside flat pocket for storage of maps, tools, phones, wallet, etc. - Tapered at the front and along the bottom for maximum carrying capacity - Designed to fit: Mukluk Aluminum, Mukluk Carbon, Blackborow, and Blackborow V2

The Salsa EXP Series Anything Cradle Front Pouch makes it easy to access the gear you rely on throughout the day on a bikepacking adventure. This pouch features fully welded construction for day-in, day-out use, and a buckle attachment design that fully integrates with our EXP Series Anything Cradle and EXP Series Dry Bag. - Keeps your ride essentials in easy reach - Designed for use with our EXP Series Anything Cradle and EXP Series Dry Bag system - Extremely weather-resistant welded design

The EXP Series Full Suspension Framepacks create storage capacity in the main triangle of your frame, keeping weight centered, and gear out of the way of off-road obstacles. They’re built with extremely durable fabric and zippers, and the result will see you through many miles, and many adventures. These framepacks are designed to fit specific Salsa suspension frames perfectly. Check the EXP Framepack Sizing Chart for fit information. - Single compartment for larger items with driveside opening - Sewn-in zipper for long-lasting durability and easy-to-use loop zipper closure - Built with materials to help maintain the pack shape and to prevent billowing - Waterproof fabrics and water-resistant construction - Padded in key areas to protect contents - NOTE: Designed for the V3 (2019) Spearfish and Horsethief. This bag does not fit previous generation Spearfish and Horsethief models.

The EXP Series Full Suspension Framepacks create storage capacity in the main triangle of your frame, keeping weight centered, and gear out of the way of off-road obstacles. They’re built with extremely durable fabric and zippers, and the result will see you through many miles, and many adventures. These framepacks are designed to fit specific Salsa suspension frames perfectly. Check the EXP Framepack Sizing Chart for fit information. - Single compartment for larger items with driveside opening - Sewn-in zipper for long-lasting durability and easy-to-use loop zipper closure - Built with materials to help maintain the pack shape and to prevent billowing - Waterproof fabrics and water-resistant construction - Padded in key areas to protect contents - NOTE: Designed for the V3 (2019) Spearfish and Horsethief. This bag does not fit previous generation Spearfish and Horsethief models.

The EXP Series Full Suspension Framepacks create storage capacity in the main triangle of your frame, keeping weight centered, and gear out of the way of off-road obstacles. They’re built with extremely durable fabric and zippers, and the result will see you through many miles and many adventures. These framepacks are designed to fit specific Salsa suspension frames perfectly. Check the EXP Framepack Sizing Chart for fit information. - Single compartment for larger items with driveside opening - Sewn-in zipper for long-lasting durability and easy-to-use loop zipper closure - Built with materials to help maintain the pack shape and to prevent billowing - Waterproof fabrics and water-resistant construction - Padded in key areas to protect contents - NOTE: Designed for the V3 (2019) Spearfish and Horsethief. This bag does not fit previous generation Spearfish and Horsethief models.