Drivetrain

Dimension classic 4-hole cruiser chainwheel, with offset to allow chainline adjustment. - Classic 4-hole cruiser chainwheel - Offset ring allows chainline adjustment - Polished steel - Fits 1-piece crankarms - Requires 1/2-inch x 1/8-inch chains

Gates Carbon Drive CDX Front Sprockets for Bosch GEN2 are crafted from stainless steel and are the best choice for high-mileage touring or rugged off-roading. - Bosch GEN2 fitment - Stainless steel construction - 11mm pitch - Includes shim kit

BSA is equivalent to English threading. English threading on MTBs mean a 73mm-wide, 34mm-inside-diameter shell with reverse threading on the drive side. It's the most common threaded standard employed today. This kit works with 24mm diameter cranks, such as Shimano, FSA, Rotor, and others. Choose between two bearing types for the cups. Standard Bearings have low drag thanks to hardened-steel races and our Ceramic balls. Coated Bearings have those same balls installed on coated, hardened-steel races for longer life and less bearing drag. For MTBs, English threading, thanks to history, is pretty much the one threaded standard. It works great. 24mm spindles easily fit through the shell, allow for large bearings to be employed in the outside cups. What's more, they rarely creak and seal up well. Lots of things slow bikes down; bearings shouldn't be among them. CeramicSpeed Standard Bearings typically have frictional drag of 0.3-0.4 watts per set. That's in the range of a 75% drag reduction compared to standard bottom brackets. The bearings last at least 3x longer than other bearings. Coated bearings have even less drag. These bearings come packed with LongLife Grease, best for muddy conditions. For less drag when riding in cleaner environs, you can coat the bearings with either All Round Grease or lowest drag TT and Track Grease, which is designed for clean conditions. In The Box - 2 threaded cups with bearings - 2 dust covers with built-in spacers - Spacer tube - 10ml syringe of LongLife grease - Sticker sheet

The Box Three shifter makes good use of nylon composites in both top and bottom shells as well as the levers. Box Three is our performance and value tier. So this shifter sheds all the fancy trappings of the top 2 tiers but maintains their shifting characteristics. All Prime 9 shifters take advantage of the 9-speed's inherent durability, simplicity, and reliability. Not only is the shifter mechanism joyfully simplified, but fewer shifts are needed for every mile of travel. And the best part is? Prime 9 is also terribly forgiving so you won't have to constantly adjust your set-up. Available as a multi-shift (pull several gears at once) or single-shift shifter (a sound choice for e-bikes).

The Box One Prime 9 Rear Derailleur takes the advantages of our legacy 9-speed drive-train but adds the advancements of a modern 1 by; a fully adjustable Tri-Pack Clutch, and an x-wide cage optimized for an 11-50T cassette. Forged construction steps up the durability and performance to an unparalleled level. Suited for the most demanding terrain.

- Front or rear brake - MTB specific - 1.5mm stainless cable

SRAM's Guide Hydraulic Line Kit is a replacement hose kit for all Guide brakes. - Compatible with SRAM Guide R, RS, RSC, and DB5 brakes - Length: 2000mm

The SRAM X-Sync Steel 1x chainrings are the perfect replacement ring for the cost conscious with added durability of steel. The same SRAM X-Sync technology at a price well below competitors’ imitation “narrow wide” rings. Best performing chainrings at the best price. - Compatibility: Compatible with all SRAM 1x cranks, DM 28-tooth ring is not compatible with 30mm cranks that require a 0mm offset ring

SRAM's 1050 10-Speed Cassette is a great choice. It's constructed of light and durable materials and boasts SRAM's PowerGlide tooth profiles and shift ramps for quick and positive gear changes every time. This trick cassette also sports a semi-spider construction for a maximum stiffness-to-weight ratio and is available in myriad configurations to suit all your riding. There are even models with 36-tooth largest cogs for super-easy climbing.

11 speed eBike chain coated with KMC’s latest breakthrough in rust protection. Eco ProteQ treatment doubles the rust resistance compared to the RustBuster treatment. Benefits of the smoother coating are less noise, great performance, maximum rust resistance and great look. - Built strong for your eBike - EPT anti-rust coating - Compatible with Shimano, SRAM & Campagnolo 11-speed systems - Mushroomed Pin Riveted - 1/2" x 11/128"

Get sharp, dependable, Exact Actuation shifting with SRAM's GX 2x10 Rear Trigger Shifter. This right-side rear shifter is compatible with SRAM’s GX 2x10-speed components and offers precise, swift shifting across their wide-range 10-speed cassette. • Dedicated 10-speed rear trigger shifter • Multi-position mounting • Aluminum pull lever • MatchMaker X compatible • Weight: 122 grams

SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly intact. - For Descendant Carbon and non-Eagle XX1 and X01

SRAM's X3 shifters feature two-lever trigger shifting performance at a great price. With Exact Actuation 1:1 cable pull ratios, these shifters deliver quick, accurate shifts.

The EX1 derailleur capitalizes on the robust build and precise shifting attributes of the X-HORIZON design, to create the world’s first derailleur specifically made for E-MTBs. Engineered to handle high-torque, low-cadence shifting across the 11-48 tooth E-Block cassette, the EX1 derailleur gives E-MTB riders clean, confident shifts, so they can spend more time enjoying the ride. - Proven SRAM X-HORIZON design that reduces shift force, ghost shifting and chain slap - 12-tooth X-SYNC pulley wheels - The EX1 derailleur is purpose built for E-MTB - Speeds: 1 x 8-speed - Weight: 289 grams - Color: Black - Outer Cage: Aluminum - Inner Cage: Aluminum - Bearings: Steel - Cage Size: Medium - Max Tooth: 48

- Complete ferrule and cable end kit - Includes: Shift 4.0mm (Qty10), Brake 5.0mm (Qty 6), Cable Tip (Qty 4) - Material: Aluminum

Get sharp, dependable single-shift gear changes with the SRAM GX-e X-ACTUATION trigger shifter. Built for precise shifting across SRAM's wide range 11-speed cassette, the GX-e trigger shifter brings SRAM 1x technology to everyone. - SRAM 1x X-ACTUATION for precise and dependable - 11-speed performance - Dependable single-shift gear changes - Multi-position mounting - MatchMaker X compatible - Aluminum pull lever - Speeds: 11 - Derailleur Compatibility: 11s - Cable pull ratio: X-actuation - Cable length: 2200mm - Shifter type: Trigger - Matchmaker compatible - Clamp included - Max upshifts: 1 - Pull lever adjust: No - Multi-position: Yes - Gear indication: No

SRAM's NX trigger shifter with X-ACTUATION technology gives you sharp, dependable shifting. Built for precise and swift shifting across SRAM's wide range 11-speed cassette, the NX trigger shifter brings industry changing technology to everyone. - X-ACTUATION for precise and dependable 11-speed performance - Fully compatible with all SRAM 1x drivetrains - Weight: 142 grams - Speeds: 1 x 11 - Colors: Black

SRAM's X0 shifters are an absolute must for riders who desire and deserve the best. The adjustable clamp and levers allow you to custom tune the shifters for one-finger, ergonomic gear changes that are near telepathic. Crafted with lightweight aluminum, the X0s are super light and race-ready, yet they're also built tough to handle all your off-road endeavors.

The Box Two shifter is the only shifter on the market (other than our Box One) that comes factory stock with a hinged clamp. Box Two is our performance tier so this shifter still maintains the durable cast aluminum top shell but trades out the Box One's 1-piece pull-lever for a 2-piece resin and steel variant. All Prime 9 shifters take advantage of the 9-speed's inherent durability, simplicity, and reliability. Not only is the shifter mechanism joyfully simplified, but fewer shifts are needed for every mile of travel. And the best part is? Prime 9 is also terribly forgiving so you won't have to constantly adjust your set-up. Available as a multi-shift (pull several gears at once) or single-shift shifter (a sound choice for e-bikes).

The Box Two shifter is the only shifter on the market (other than our Box One) that comes factory stock with a hinged clamp. Box Two is our performance tier so this shifter still maintains the durable cast aluminum top shell but trades out the Box One's 1-piece pull-lever for a 2-piece resin and steel variant. All Prime 9 shifters take advantage of the 9-speed's inherent durability, simplicity, and reliability. Not only is the shifter mechanism joyfully simplified, but fewer shifts are needed for every mile of travel. And the best part is? Prime 9 is also terribly forgiving so you won't have to constantly adjust your set-up. Available as a multi-shift (pull several gears at once) or single-shift shifter (a sound choice for e-bikes).

Built for E-MTB, the X01 Eagle Single Click shifter meets the new world of E-MTB with a control center worthy of the task. It's designed to help eliminate premature chain wear and chain breaking by limiting the pull lever to a single engagement. - E-MTB specific—limits the pull lever to a single engagement to help eliminate premature chain wear and chain breaking - Master X01 Eagle group colorway to match all cassette and chain colors as part of Eagle Colorsystem

Cables are coated with a durable low-friction polymer. - Dupont Tefzel coating is more durable than previous coated cables - Length: 2350mm - Diameter: 1.6mm - Double Ended: No

SRAM's X5 shifters feature Exact Actuation 1:1 cable pull ratios for precise, dependable shifting. Crafted with lightweight aluminum, the X5s are built tough to handle all your off-road endeavors.

The KMC X-Series has been designed with the specific characteristics of the Shimano, SRAM, and Campagnolo systems in mind and will meet the most demanding requirements. Elaborately designed and manufactured, the X-Bridge technology, thanks to precisely chamfered plates, allows a smooth propulsion and perfect gear changes in all driving situations. - Size: 1/2"x11/128" - Length: 116 Links - Weight: 273 grams

It’s simple. It’s about performance. The pure shifting performance of Eagle AXS is the real difference maker. Shift under load, over the roughest terrain, uphill, without changing your grip on the bar. Eagle AXS changes your level of control on the bike when you’re under pressure and pushing hard into the red. But more than that, it changes your relationship with the bike. No cable, housing or wires to manage opened up design and engineering possibilities with the Eagle AXS controller. Helping us pioneer a completely new shifting experience with new ergonomic touchpoints that take just enough effort to press. Touchpoints that are totally customizable to your preferences, allowing you to choose which button does what through the AXS App. - Compatible with MatchMaker X - Eagle technology - Customize in-board and outboard shift options - Pairs with both XX1 and X01 Eagle AXS derailleurs - AXS enabled componentry software that makes it possible to both program and personalize new SRAM and RockShox components - System is completely water and dust proof to IP69K

SRAM's X3 shifters feature two-lever trigger shifting performance at a great price. With Exact Actuation 1:1 cable pull ratios, these shifters deliver quick, accurate shifts.

SRAM's GXP PressFit Road Bottom Bracket Cups are the premium choice for getting the most out of every pedal stroke. They feature smooth bearings that keep drag to a minimum and seals that keep debris out. Plus, these BB cups press directly into the frame without having to be threaded in for reduced weight and enhanced durability.

CS-G110 cassettes combine microSHIFT's continuously molded cogs with a CNC machined aluminum spider to deliver rapid, precise shifting at a lower weight. - Continuously molded cogs are straighter than stamped steel, resulting in more consistent, predictable shifting performance - CNC machined aluminum alloy spider carrier saves weight - Sprockets are chrome-plated for hardness and corrosion resistance - Precision ramps and chamfers for rapid chain movement - Compatible with SRAM and Shimano 11-speed systems - Aluminum lock ring Combinations: - 11 – 25T: 11-12-13-14-15-16-17-19-21-23-25 - 11 – 28T: 11-12-13-14-15-16-17-19-21-24-28 - 11 – 32T: 11-12-13-14-15-17-19-21-24-28-32

MicroSHIFT's H10 cassettes are manufactured to exacting tolerances for straightness, shift quality, and durability, resulting in responsive shifting performance that lasts longer than you might expect. - Sprockets are chrome-plated for hardness and corrosion resistance - Continuously molded cogs are straighter than stamped steel, resulting in more consistent, predictable shifting performance - Precision ramps and chamfers for rapid chain movement - Compatible with SRAM and Shimano 10-speed systems - Steel lock ring Gear combinations: - 11-25T: 11-12-13-14-15-17-19-21-23-25 - 11-28T: 11-12-13-14-15-17-19-21-24-28 - 11-32T: 11-12-13-15-17-19-21-24-28-32 - 11-34T: 11-12-13-15-17-19-21-24-28-34 - 11-36T: 11-13-15-17-19-21-24-28-32-36

MicroSHIFT's H11 cassettes are manufactured to exacting tolerances for straightness, shift quality, and durability, resulting in responsive shifting performance that lasts longer than you might expect. - Continuously molded cogs are straighter than stamped steel, resulting in more consistent, predictable shifting performance - Precision ramps and chamfers for rapid chain movement - Compatible with SRAM and Shimano 11-speed systems - Steel lock ring - Chrome plated for hardness and corrosion resistance Gear combinations: - 11-25T: 11-12-13-14-15-16-17-19-21-23-25 - 11-28T: 11-12-13-14-15-16-17-19-21-24-28 - 11-32T: 11-12-13-14-15-17-19-21-24-28-32 - 11-42T: 11-13-15-17-19-21-24-28-32-36-42