Filter By:
- Bar Ends (4)
- BMX (36)
- Bottom Brackets (36)
- Brakes/Levers/Pads (178)
- Cables (18)
- Cassettes/Freewheels (57)
- Chainrings (73)
- Chains (67)
- Show More Categories
- Cranksets (70)
- Derailleurs (59)
- Forks (61)
- Groups (14)
- Handlebar Grips/Tape (134)
- Handlebars (61)
- Headsets (26)
- Pedals (79)
- Saddles (58)
- Seatposts (29)
- Shift/Brake Combinations (21)
- Shifters (66)
- Shocks (1)
- Stems (35)
- Other (325)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts
$24.95
The precision-engineered Wolf Tooth Seatpost Clamp secures your seatpost and looks good doing it. At the heart of the Wolf Tooth Seatpost Clamp is a custom self-aligning bolt and anchor. The M5 bolt includes spherical washer and mates with a cylindrical anchor barrel. This means that threads are always perfectly aligned, preventing binding and ensuring consistent clamping force.
- M6 stainless steel bolt with integrated washer
- Tool interface - 4mm hex key
$24.95
The precision-engineered Wolf Tooth Seatpost Clamp secures your seatpost and looks good doing it. At the heart of the Wolf Tooth Seatpost Clamp is a custom self-aligning bolt and anchor. The M5 bolt includes spherical washer and mates with a cylindrical anchor barrel. This means that threads are always perfectly aligned, preventing binding and ensuring consistent clamping force.
- M6 stainless steel bolt with integrated washer
- Tool interface - 4mm hex key
$19.95
These bolts are designed as a direct fit for 30 Tooth x 104 BCD threaded chainring. These are alloy bolts with 4mm hex heads and 10mm length.
- Designed for M8 x .75 thread pitch
- 10mm long
- 4mm hex head
- Bolt length is laser engraved onto the bolt head for easy length identification
- 6-7 Nm installation torque with light grease on threads only
$44.95
The Tanpan brings the range and security of Shimano mountain rear derailleurs to Shimano-equipped drop-bar bicycles. This means a greater gearing range for bigger adventures, better chain security for rough terrain, and lighter weight and reduced complexity for the daily commute. In order to deliver these benefits, the Tanpan amplifies road shifter cable pull to allow for seamless communication with mountain derailleurs. The result is ideal for riders looking to convert their road, gravel, cyclocross, or commuter bike to the simplicity and light weight of a single chainring.
- Not Compatible with Tiagra 4700
- Compatible with most road, CX and gravel bikes
- Designed to mount directly to adjuster-free cable stops on Shimano rear derailleurs
- Certain chainring and cassette configurations benefit from a Goatlink
- If the rear derailleur cable is routed internally through the chainstay and exits at the end of the chainstay above the axle or past the axle out the very end, you will need to utilize the inline ferrule
$24.95
Valais Dropper Post Seat Bag Adapter
- Allows the usage of seat packs on a dropper post
- Protects the dropper stanchion from wear and grit
- Can act as a travel limiter when full drop isn't needed
$29.95
ReMount Dropper Seatpost Part
- Designed to work with cable actuated dropper levers with pivots parallel to the handlebar's center.
- 22.2 Inner diameter for fitment to MTB bars
$44.95
Wolf Tooth Performance Headsets are machined out of aircraft grade aluminum and assembled with Black Oxide Cartridge Bearings, balancing quality and price.
- Black Oxide Bearings are made from chromium steel for high load capacity and durability
- Black oxide coating reduces corrosion
$64.95
Wolf Tooth headsets are machined here in our Minnesota shop with aircraft-grade 6061 aluminum. They are designed to be lightweight, strong, and durable. Our headsets have three levels of industry-leading custom sealing to protect bearings from the elements and prolong the life of the headset. Available in a variety of colors. These ZS headsets are for frames with internal bearing cups that are pressed into the frame. Premium Headsets with Enduro stainless steel bearings have a lifetime warranty.
Upper assembly features:
- Ultralight stem cap with integrated spacer plus an aluminum bolt and a star nut.
- 6, 15, and 25 mm stack height top cover options (6mm cover = 6mm total stack, 15mm cover = 15 total stack, 25mm cover = 25mm total stack).
- O-ring seal prevents water intrusion around the steerer tube.
- Custom-molded upper lip seal provides additional protection for the upper bearing.
$34.95
Wolf Tooth headsets are machined here in our Minnesota shop with aircraft-grade 6061 aluminum. They are designed to be lightweight, strong, and durable. Performance Headsets with Enduro black oxide bearings have a one-year warranty. Our headsets have three levels of industry-leading custom sealing to protect bearings from the elements and prolong the life of the headset. Available in a variety of colors. These ZS headsets are for frames with internal bearing cups that are pressed into the frame.
Lower assembly features:
- Custom-molded dual-lip seal on the crown race protects lower bearing in the toughest conditions.
- All components are precision machined in-house at Wolf Tooth from aircraft-grade aluminum to ensure the highest level of quality.
- Service and additional parts available.
$78.00 - $80.00
Whisky's No.7 12F is their most versatile drop bar. It's equally at home on tarmac, gravel or twisty cyclocross courses. From touring to racing, this modern bar is a great addition to almost any bike in your stable. The comfortable 12-degree flare provides excellent control and comfort, especially off-road, or in challenging conditions. A semi-compact design offers seamless transitions between positions. Available in a complete size range, this bar is a perfect fit for any rider.
- 7050 Alloy
- 282g (42cm)
- Drop: 116mm
- Reach: 68mm
- Flare: 12°
- Measured Center-to-Center at the levers
$78.00
Whisky's No.7 24f is designed for comfort and control in challenging situations. Specifically aimed at long distance touring, gravel, or off-road pursuit, the 24-degree flare offers huge control from the drops. This thoroughly modern drop bar is the perfect match to your off-road tourer, monstercross bike, or get-rad CX rig. The 24f’s sleek design offers seamless transition between positions. Available in a broad size range, there’s a width to perfectly fit your needs.
- 7050 Alloy
- 282g (42cm)
- Drop: 116mm
- Reach: 68mm
- Flare: 24°
- Measured Center-to-Center at the levers
$70.00
The Whisky No.7 Seatposts are made from the highest quality materials to be durable, lightweight, and comfortable. Whether you’re remounting during the cross race, or abusing them on the trail, you can trust Whisky’s seatposts. Available in different diameters and offsets.
- Convenient finger adjustment of saddle angle
- Unidirectional carbon shaft, forged aluminum head
- No rider weight limit
- 5 year Whisky warranty
- ASTM Condition 3 - For rough off-road riding and jumps less than 24"
$48.00
Whisky's No.7 Mountain stems offer a stout connection for modern mountain bars. They match the simple, clean aesthetic of other Whisky cockpit components.
- Bead-blasted, then anodized, finish
- 3D-forged for increased strength, then CNC-machined
- 4-bolt faceplate design for easy installation
$425.00
The No.7 road fork features full unidirectional carbon construction, available in tapered or straight steerer tubes.
- Full unidirectional carbon construction
- Mid-Reach Caliper rim brake compatible
- 35c max recommended tire size
- ASTM Condition 2 - For off-road riding and jumps less than 12"
- No rider weight limit
- 5 year Whisky warranty
- Accommodates road plus tires
- Fender mounts
$42.00 - $45.00
Whisky's No.7 Stem is a lightweight stem with a clean aesthetic. Stems only have a few jobs to do: hold the bars, provide stable support, and look good. Ours does all three admirably. Paired with any of our handlebars, it rounds out the perfect Whisky cockpit. Available in a wide range of lengths to perfect your bike's fit and performance.
$525.00
The No.9 CX Flat Mount fork is a light-weight, forward-compatible front-end upgrade, ideal for cyclocross, gravel, or commuting. Featuring the flat mount disc brake standard, easy fender mounts and 12mm thru-axle dropouts to create a refined, clean design that trims considerable weight over previous versions. The fork provides big tire clearance, precise handling and tracking capabilities, and a comfortable ride quality that Whisky forks are known for.
- 12mm thru-axle, 100mm spacing
- Designed for flat mount disc brakes
- Hidden, removable fender mounts
- 42mm max recommended tire size
- ASTM Condition 2 - For off-road riding and jumps less than 12-inches
- Includes thru-axle and Whisky Parts Co. compression plug
$158.00
Whisky's No.9 Flat Bar keeps your weight lower and more forward on the bike for a more aggressive riding position. It’s wide, sleek, and tested to the highest standards to deliver hours of reliable trail riding. Trimmable ends allow you to really dial in your fit to keep you comfortable every time your tires hit the dirt or snow.
$78.00 - $80.00
The No.7 6F is our take on a modern performance drop bar. Sleek, ergonomically designed curves end in a wrist-friendly 6-degree flare at the drops. This gives just enough space to open your chest and provides forearm clearance in the drop position. This modern design offers seamless transitions between positions. The 6F features a slightly deeper drop than our 12F and 24F handlebars. Available in a complete size range so you can dial in your fit.
$435.00
When a fork isn’t designed well, you feel it from the minute you start your ride. That is why Whisky poured over every detail, pushed the limits, and broke new ground during the creation of the No.7 Carbon Disc Cyclocross Fork. It makes sure you don't have to worry about uncomfortable chatter or vibration while experiencing an astoundingly plush ride. They've accomplished this by using proven technologies like a delightfully stiff and compliant UD carbon fiber construction, not to mention the use of disc brake mounts on their CX forks. It all results in an enhanced riding experience and adds up to performance that you can count on.
- Axle to Crown Length: 392.2mm
- Brake Mount (Fork): Post Mount 140mm
- Front Axle: 10mm x 100mm
- Material: Carbon
- Maximum Tire Clearance (Fork): 48
- Offset: 47mm
- Rotor Size (Fork): 160mm
- S.H.I.S. Stem Clamp Diameter: 28.6
- Steerer Tube Length (mm): 300mm
- Wheel Size: 700c
$425.00
The Whisky No.7 RD thru-axle fork is a thoroughly modern road fork for road bikes with tapered steerer tubes. It features a 12mm thru-axle for precise handling, clearance for high-volume road tires, and clean internal cable routing. Flat mount brake capability offers clean caliper fitment and backwards compatality with post mount brakes using adaptors.
- 100 x 12mm thru-axle
- 1-1/8 – 1.5" tapered steerer
- 45mm offset
$350.00
The Whisky No.7 RD fork is a modern caliper road fork for road bikes with tapered steertubes. Their No.7 RD fork features a standard 9mm x 100mm QR axle. It offers low weight, precise handling, and clearance for 28c tires. This is a perfect upgrade fork for in lieu of a steel or alloy fork, and makes a great replacement fork for existing carbon product.
$375.00
The No.7 Road fork is a thoroughly modern design, compatible with road bikes that utilize tapered steerer tubes. Features include 9mm x 100mm QR dropouts and brake mount for short-reach caliper rim brakes, to easily accommodate standard road wheels. The fork offers low weight, precise handling and tire clearance for up to 700 x 28c tires.
- 9mm x 100mm spacing
- For use with short reach caliper rim brakes
- 700 x 28c max recommended tire size
- ASTM Condition 1 - For use on paved surfaces
- Includes Whisky Parts Co. compression plug
- Axle to Crown Length: 367 mm
- Brake Mount (Fork): Short Reach Caliper (39mm - 49mm)
- Color: Black
- Crown Race: 30
- Defined Color: Black
- Front Axle: 9mm x 100mm
- Material: Carbon
- Offset: 43 mm
- S.H.I.S. Stem Clamp Diameter: 28.6
- Steerer Type: Straight
- Steerer Tube Length (mm): 300 mm
- Weight: 370 g
- Wheel Size: 700c , 650b
- Maximum Tire Clearance (Fork): 30c
$105.00
Seatposts can be an overlooked part of the bike, but at Whisky Parts Co., everything gets the same attention to detail so your ride never suffers. Their seatposts are made from the highest quality carbon, ensuring they are durable, lightweight, and comfortable. Whether you’re remounting during a cross race or abusing them on the trail, you'll be glad you have the No.7.
- Carbon shaft absorbs trail chatter
- UD carbon shaft, forged aluminum head
$225.00
The No.9 12F Carbon is Whisky’s most versatile drop bar, that’s equally at home on tarmac, gravel, twisty cyclocross courses, and double-track. From touring to racing, this modern bar is a great addition to almost any bike. The comfortable 12-degree flare provides excellent control and comfort, especially off-road or in challenging conditions. A semi-compact design offers seamless transitions between positions, and we’ve made smart updates to improve compatibility with all your favorite drop bar controls.
- Unidirectional carbon fiber construction with new carbon layup to better accommodate clamping forces of modern controls
- Drop/Reach: 115/68mm
$225.00
The No.9 24F carbon drop bar is designed for comfort and control in challenging situations. Specifically aimed at long-distance touring, gravel, and off-road pursuits, the 24-degree flare offers huge control from the drops. The carbon construction provides a light, stable platform that reduces vibration and adds comfort, plus a new carbon layup that better accommodates clamping forces of modern controls. This thoroughly modern drop bar is the perfect match to your off-road tourer, monster cross bike, or get-rad CX rig. The 24F’s sleek design offers a seamless transition between positions. Available in a broad size range, there’s a width to perfectly fit your needs.
$525.00
The Whisky No.9 CX Flat Mount fork is a lightweight, forward-compatible front-end upgrade, ideal for cyclocross, singletrack, gravel, or commuting. Redesigned, thoroughly tested, and dialed in for rough, off-road riding, it features the flat-mount disc brake standard, easy fender mounts, 12mm thru-axle dropouts, and internal brake routing for a refined, clean design. The fork provides big tire clearance, precise handling and tracking capabilities, and a comfortable ride quality that Whisky forks are known for.
- 12mm thru-axle, 100mm spacing
- Designed for flat-mount disc brakes
- Fender eyelets on outside of fork leg for easy mounting
- 700c x 42mm or 650B x 50mm max recommended tire size
- ASTM Condition 3 – For rough off-road riding and jumps less than 24-inches
- Includes thru-axle and Whisky Parts Co. compression plug
$565.00
Sleek and serviceable, the Whisky No.9 CXLR Fork is a tough, lightweight upgrade for gravel riders and bikepackers looking to carry a little cargo up front. Sporting 3-pack mounts, mid-blade mounts for low-rider rack compatibility, and fender eyelets on the outside of the fork legs for easy mounting, the CXLR keeps everything clean and tidy with internal routing for brakes and dynamo hubs. Additional features like flat-mount brakes, 12mm thru-axles, and ample tire clearance make this standout piece perfect for your packing setup.
- 12mm thru-axle, 100mm spacing
- 700c x 42mm or 650b x 50mm max recommended tire size
- ASTM Condition 3 – For rough off-road riding and jumps less than 24
- Includes thru-axle and Whisky Parts Co. compression plug
- Brake Mount: Flat Mount 140
- Material: Carbon
- Weight: 526g
- Steerer Type: Tapered
- Offset/Rake: 45
- Steerer Tube Length: 350mm
- Axle to Crown Length: 395mm
- S.H.I.S. Crown Race Diameter: 40
- S.H.I.S. Stem Clamp Diameter: 28.6
- Fork Minimum Rotor Size: 140
- Fork Maximum Rotor Size: 160
$525.00
Whisky poured over every detail, pushed the limits and broke new ground during the creation of the No.9 Rigid Carbon Mountain Bike Fork. It eliminates uncomfortable chatter and vibration over rough sections for an astoundingly plush ride. The delightfully stiff and compliant UD carbon fiber construction, tapered steerer, and 15mm thru-axle ensure minimal weight and precise handling. It all results in an enhanced riding experience and adds up to performance that you can count on.
- Custom DT RWS Skewer included
- 3.0" max recommended tire size
- Axle to Crown Length: 480mm
- Brake Mount: IS Disc Brake 160mm
- Crown Race: 40
- Defined Color: Black
- Front Axle: 15 x 100mm
- Offset: 51mm
- S.H.I.S. Stem Clamp Diameter: 28.6
- Steerer Type: Tapered
- Weight: 750 grams
- Wheel Size: 29-inch
$540.00
Whisky poured over every detail, pushed the limits, and broke new ground during the creation of the No.9 Fat Rigid Carbon Mountain Bike Fork. It eliminates uncomfortable chatter and vibration over rough terrain, so you experience an astoundingly plush ride with precise handling. They've accomplished this by using a delightfully stiff and compliant UD carbon fiber construction, a tapered steerer, and a 15 x 150mm thru-axle. It all results in an enhanced riding experience and adds up to performance that you can count on.
- Post style brake mount
- DT RWS Axle included
- UD full carbon construction
- Axle to Crown Length: 480mm
- Brake Mount: Post Mount 160mm
- Crown Race: 40
- Front Axle: 15 x 150mm
- Material: Carbon
- Offset: 51mm
- S.H.I.S. Stem Clamp Diameter: 28.6
- Steerer Type: 1-1/8 – 1-1/2-inch tapered
- Weight: 750 grams
- Wheel Size: 26-inch
$565.00
The Whisky No.9 MCX “monster cross” fork brings extra-wide tires to your drop-bar bike. How wide? The MCX accommodates tires up to 700c x 51mm or 650b x 61mm (that’s 2.4-inches). A relatively short 415mm axle-to-crown minimizes the geometry effects of a larger fork, and a 51mm offset improves toe clearance with large tires or fenders. The design draws from our CX forks, with lightweight carbon construction, a 12mm thru axle, and flat-mount brakes. Three-Pack mounts, dynamo cable routing, and fender mounts (700c x 45mm tire clearance with fender) add versatility for bikepackers and gravel riders.
- 12 x 100mm thru-axle
- Designed for flat mount disc brakes
- Hidden, removable fender mounts
- 700c x 51mm or 650b x 61 mm max tire size
- ASTM Condition 2 - For off-road riding and jumps less than 12-inches
- Includes thru axle and Whisky Parts Co. compression plug