Mon-Fri 10am - 8pm   |   Sat-Sun 10am - 5pm
NATION'S LARGEST BIKE STORE

Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Forks

(29 matches)
Whisky Parts Co. No. 7 Road Plus Fork
$399.99
The No.7 road fork features full unidirectional carbon construction, available in tapered or straight steerer tubes. - Full unidirectional carbon construction - Mid-Reach Caliper rim brake compatible - 35c max recommended tire size - ASTM Condition 2 - For off-road riding and jumps less than 12" - No rider weight limit - 5 year Whisky warranty - Accommodates road plus tires - Fender mounts
Whisky Parts Co. No.7 Carbon Cantilever Cyclocross Fork
$399.99
When a fork isn’t designed well, you feel it from the minute you start your ride. That is why Whisky poured over every detail, pushed the limits and broke new ground during the creation of the No.7 Carbon Cantilever Cyclocross Fork. It makes sure you don't have to worry about uncomfortable chatter or vibration while experiencing an astoundingly plush ride. They've accomplished this by using the proven technology of a delightfully stiff and compliant UD carbon fiber construction. It all results in an enhanced riding experience and adds up to performance that you can count on. - Cantilever brakes with 22mm posts - 51mm clearance between fork blades - Includes compression plug - Axle to Crown Length: 392.2 mm - Brake Mount (Fork): Canti Studs - Crown Race: 30 - Front Axle: 10mm x 100mm - Material: Carbon - Maximum Tire Clearance (Fork): 48mm - Offset: 45 mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Tube Length (mm): 300 mm - Steerer Type: Straight - Wheel Size: 700c
Whisky Parts Co. No.7 Carbon Disc Cyclocross Fork
$399.99
When a fork isn’t designed well, you feel it from the minute you start your ride. That is why Whisky poured over every detail, pushed the limits, and broke new ground during the creation of the No.7 Carbon Disc Cyclocross Fork. It makes sure you don't have to worry about uncomfortable chatter or vibration while experiencing an astoundingly plush ride. They've accomplished this by using proven technologies like a delightfully stiff and compliant UD carbon fiber construction, not to mention the use of disc brake mounts on their CX forks. It all results in an enhanced riding experience and adds up to performance that you can count on. - Axle to Crown Length: 392.2mm - Brake Mount (Fork): Post Mount 140mm - Front Axle: 10mm x 100mm - Material: Carbon - Maximum Tire Clearance (Fork): 48 - Offset: 47mm - Rotor Size (Fork): 160mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Tube Length (mm): 300mm - Wheel Size: 700c
Whisky Parts Co. No.9 Carbon Disc Cyclocross Fork w/Fender Mounts
$499.99
When a fork isn’t designed well, you feel it from the minute you start your ride. That is why Whisky poured over every detail, pushed the limits, and broke new ground during the creation of the No.9 Carbon Disc Cyclocross Fork. It eliminates uncomfortable chatter and vibration for an astoundingly plush ride. The delightfully stiff and compliant UD carbon fiber construction, disc brake mounts, and a stiff, secure thru-axle ensure low weight and precise braking and handling. Plus, fender mount means you'll be bounding out the door on even the rainiest days. It all results in an enhanced riding experience and adds up to performance that you can count on. - Axle to Crown Length: 395mm - Brake Mount: Post Mount 140mm - Crown Race: 40 - Front Axle: 15 x 100mm - Material: Carbon - Maximum Tire Clearance: 45mm - Offset: 45mm - Rotor Size: 185mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Tube Length: 300mm - Steerer Type: Tapered - Wheel Size: 700c
Whisky Parts Co. No.9 Carbon Disc Thru-Axle Cyclocross Fork
$499.99
Whisky poured over every detail, pushed the limits, and broke new ground during the creation of the No.9 Carbon Disc Cyclocross Fork. It eliminates uncomfortable chatter and vibration for an astoundingly plush ride. A delightfully stiff and compliant UD carbon fiber construction, disc brake mounts, and a stiff, secure thru-axle result in an enhanced riding experience and performance that you can count on. - 1.125 - 1.5-inch tapered carbon steerer - Axle to Crown Length: 395mm - Brake Mount (Fork): Post Mount 140mm - Crown Race: 40 - Front Axle: 15 x 100mm - Material: Carbon - Maximum Tire Clearance: 45mm - Offset: 45mm - Rotor Size (Fork): 185mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Tube Length: 300mm - Steerer Type: Tapered - Wheel Size: 700c
Whisky Parts Co. No.9 Carbon Mountain Fork 29-inch
$499.99
Whisky poured over every detail, pushed the limits and broke new ground during the creation of the No.9 Rigid Carbon Mountain Bike Fork. It eliminates uncomfortable chatter and vibration over rough sections for an astoundingly plush ride. The delightfully stiff and compliant UD carbon fiber construction, tapered steerer, and 15mm thru-axle ensure minimal weight and precise handling. It all results in an enhanced riding experience and adds up to performance that you can count on. - Custom DT RWS Skewer included - 3.0" max recommended tire size - Axle to Crown Length: 480mm - Brake Mount: IS Disc Brake 160mm - Crown Race: 40 - Defined Color: Black - Front Axle: 15 x 100mm - Offset: 51mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: Tapered - Weight: 750 grams - Wheel Size: 29-inch
Whisky Parts Co. No.9 Fat Fork Carbon Mountain
$499.99
Whisky poured over every detail, pushed the limits, and broke new ground during the creation of the No.9 Fat Rigid Carbon Mountain Bike Fork. It eliminates uncomfortable chatter and vibration over rough terrain, so you experience an astoundingly plush ride with precise handling. They've accomplished this by using a delightfully stiff and compliant UD carbon fiber construction, a tapered steerer, and a 15 x 150mm thru-axle. It all results in an enhanced riding experience and adds up to performance that you can count on. - Post style brake mount - DT RWS Axle included - UD full carbon construction - Axle to Crown Length: 480mm - Brake Mount: Post Mount 160mm - Crown Race: 40 - Front Axle: 15 x 150mm - Material: Carbon - Offset: 51mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: 1-1/8 – 1-1/2-inch tapered - Weight: 750 grams - Wheel Size: 26-inch
Salsa CroMoto Grande 29-inch
$130.00
Looking to go rigid? Then check out Salsa's suspension-corrected CroMoto Grande mountain bike fork. This chromoly beauty boasts ISO disc tabs for premium braking and it's compatible 1-1/8" threadless headsets. Plus, it comes with fender eyelets so you can stay clean even when it's sloppy out.
Salsa Vaya Road Fork
$139.00
There's a whole lot you can do with Salsa's Vaya Road Fork. Touring, long rides and commuting are made easy because this chromoly fork has mid-blade bosses for a rack, disc brake mounts, and clearance for up to a 42c tire! And for more versatility, it sports fender eyelets and an easy-to-match black color.
Manitou Dorado Expert Fork
$1,200.00
Manitou's Dorado Expert is an engineering masterpiece. 7050 legs, inverted construction, dual-chamber air spring, TPC+ damping (with independent high- and low-speed compression), hydraulic bottom-out and top-out, and Manitou’s patented HexLock 20mm thru-axle add up to the most advanced downhill fork ever. - Weight Lb / grams: 6.82 / 3096 - Travel: 180, 203mm Internally Adj. (29'er 150, 175mm) - Spring: Air - Spring Rate: n/a - Bottom Out: Hydraulic and Rubber Bumper - Steerer: 1 1/8" Aluminum - Crown: Forged Hollow Bore - Crown Finish: Matte Ano Polished - Offset: 49.55 - Compression Damping: TPC+ - Rebound Damping: Adjustable TPC - Adjustments: Air Compression (High Speed and TPC+), Rebound - Leg Diameter: 36mm - Leg Material: Aluminum - Wheel Size: 26" / 27.5" / 29" - Brake: Post Mount - Axle: 20mm Hex TA - Crown to Axle: 567 / 591(26") 582/606(27.5") 567/591(29") - Colors: Black Ano
Manitou Dorado Pro Fork
$1,600.00
Manitou's Dorado Pro is an engineering masterpiece. 7050 legs, inverted construction, dual-chamber air spring, TPC+ damping (with independent high- and low-speed compression), hydraulic bottom-out and top-out, and Manitou’s patented HexLock 20mm thru-axle add up to the most advanced downhill fork ever. - Weight Lb / grams: 6.55 / 2973.7 - Travel: 180, 203mm Internally Adj. (29'er 150, 175mm) - Spring: Air - Spring Rate: n/a - Bottom Out: Hydraulic and Rubber Bumper - Steerer: 1 1/8" Aluminum - Crown: Forged Hollow-Oval Bore - Crown Finish: Black Ano Polished - Offset: 49.55 - Compression Damping: TPC+ - Rebound Damping: Adjustable TPC - Adjustments: Air Compression (High Speed and TPC+) Rebound - Leg Diameter: 36mm - Leg Material: 7050 Aluminum - Wheel Size: 26" / 27.5" / 29" - Brake: Post Mount - Axle: 20mm Hex TA - Crown to Axle: 567 / 591(26") 582/606(27.5") 567/591(29") - Axle: 9mm, 20mm, QR15 - Crown to Axle: 27.5" - 516.5/536.5
Manitou Magnum Pro Plus
$899.99
The Plus size category is brand new, and Manitou has already improved it. That’s because their Magnum fork is standard equipment on debut Plus rides from some of the world’s most accomplished manufacturers. The Magnum is specifically tuned to maximize the rolling inertia of the larger tire patch. Translated, it means Magnum will make your Plus riding experience smooth and predictable. Pioneering a dynamic front suspension in this category is just one more, big fat example of Manitou's commitment to excellence. - Clearance for up 3.3-inch-wide tires - 120mm version internally adjustable to 140mm travel with included spacers, while 100mm version is internally adjustable to - 80mm with included spacers - Dorado air spring system - 1.5” Tapered steerer - 48mm (27.5") / 51mm (29") offset - Post Mount 180mm brakes - 34mm stanchions, alloy steerer - QR15 axle - Requires a 15x110mm hub
Manitou Minute Pro Fork
$700.00
A great fork communicates everything that’s happening between your tire and the trail, without jarring loose any expensive dental work. In the past, though, you had to accept a weight penalty in order to gain rock-solid steering. The Minute is here to change all that with its ultra-stiff 32mm stanchions, MARS Air spring, and available Hex Lock thru-axle. Forget about noodly XC forks and heavy trail forks. It’s time for a Minute. - Weight Lb / grams: 3.65 / 1657 - Travel: 120, 140 - Spring: MARS AIR - Spring Rate: Firm - Bottom Out: Rubber Bumper - Steerer: 1 1/8" Aluminum 1.5" Taper - Crown: Forged Deep Bore Hollow Crown - Crown Finish: Silver Polished - Offset: 26" - 41.27, 27.5" - 44, 29" - 48 - Compression Damping: TPC Technology Absolute+ Trail Tuned - Rebound Damping: Adjustable TPC - Adjustments: Air Compression to Lockout Rebound - Leg Diameter: 32mm - Leg Material: 7050 Butted AL - Wheel Size: 26" / 27.5" / 29" - Brake: Post Mount - Axle: 9mm, 20mm, QR15 - Crown to Axle: 26" - 498/520, 27.5" - 516.5/536.5, 29" - 530/550 - Colors: Black or White
Lizard Skins Cut-To-Fit Fork Boot
$13.99
- Neoprene and velcro boots deflect mud, water and debris - Cut-To-Fit design makes sizing simple. One size fits most
Lizard Skins Frame Shock Boot
$8.99
- Protective neoprene and velcro cut-To-Fit boot fits most rear shocks
Heller Bloodhound Carbon Fork
$349.00
Heller's Bloodhound carbon fatbike fork tracks straight and true through whatever the trail throws in your path. Carbon legs and a tapered carbon steerer provide low weight and remarkable front-end stiffness. The 15x150mm thru-axle minimizes flex at the fork tips, and the extra wide fork shoulders provide oodles of room for your preferred super-sized tires.
Dimension 1-Inch Threaded 700c Cyclocross/Hybrid Fork
$79.99
700c Hybrid fork with Cantilever Mounts - Forged dropouts with eyelets, straight-gauge oval-tapered blades - Dimension Forks are intended for general recreational riding only; they are not intended for aggressive riding, stunt riding or road racing - Welded unicrown construction - Axle to Crown Length: 403mm - Brake Mount (Fork): Canti Studs - Color: Black - Crown Race: 26 - Front Axle: 10mm x 100mm - Material: Steel - Offset: 50mm - S.H.I.S. Stem Clamp Diameter: 25.4-24 tpi Quill - Steerer Tube Length (mm): 170 - Steerer Type: Straight - Wheel Size: 700c
Dimension Threaded 26-Inch Rigid Mountain Fork
$79.99
Dimension Rigid Mountain Forks are intended for general recreational riding only; they are not intended for aggressive riding, stunt riding or road racing. - Forged dropouts with eyelets - Chromoly tubing - Cantilever mounts only (no disc mount) - Axle to Crown Length: 395mm - Brake Mount (Fork): Canti Studs - Color: Black - Crown Race: 30 - Front Axle: 10mm x 100mm - Maximum Tire Clearance (Fork): 3.8 - Offset: 45mm - S.H.I.S. Stem Clamp Diameter: 25.4-24 tpi Quill - Steerer Tube Length (mm): 140 - Steerer Type: Straight - Weight: 877g - Wheel Size: 26-inch
Dimension Threadless 26-Inch Rigid Mountain Fork
$79.99
Dimension Rigid Mountain Forks are intended for general recreational riding only; they are not intended for aggressive riding, stunt riding or road racing. - Forged dropouts with eyelets - Chromoly tubing - Cantilever mounts only (no disc mount) - Axle to Crown Length: 395mm - Brake Mount (Fork): Canti Studs - Crown Race: 30 - Front Axle: 10mm x 100mm - Maximum Tire Clearance (Fork): 3.8 - Offset: 45mm - S.H.I.S. Stem Clamp Diameter: 25.4 - Steer Tube length: 260mm - Steerer Type: Straight - Weight: 1000g - Wheel Size: 26-inch
Dimension Threadless 700c Cyclocross/Hybrid Fork
$79.99
700c Hybrid fork with Cantilever Mounts - Forged dropouts with eyelets, straight-gauge oval-tapered blades - Dimension Forks are intended for general recreational riding only; they are not intended for aggressive riding, stunt riding or road racing - Welded unicrown construction - Clearance for 50mm wide fenders (1 1/8-inch) - Axle to Crown Length: 403mm (1 1/8-inch); 412mm (1 1/8-inch SC); 403mm (1-inch) - Brake Mount (Fork): Canti Studs - Color: Black - Crown Race: 30 (1 1/8-inch, 1 1/8-inch SC); 26 (1-inch) - Front Axle: 10mm x 100mm - Material: Steel - Offset: 50 mm - S.H.I.S. Stem Clamp Diameter: 28.6 (1 1/8-inch, 1 1/8-inch SC); 25.4 (1-inch) - Steerer Tube Length: 300mm (1 1/8-inch); 260mm (1 1/8-inch SC); 300mm (1-inch) - Steerer Type: Straight - Weight: 975g (1 1/8-inch); 1105g (1 1/8-inch SC); 963g (1-inch) - Wheel Size: 700c
Dimension Threadless 700c Road Fork
$79.99
Dimension Road Forks are intended for general recreational riding only; they are not intended for aggressive riding, stunt riding or road racing. - Forged dropouts with eyelets, welded unicrown construction - Designed for short-reach caliper brakes - 25 x 14mm tapered oval blades - Axle to Crown Length: 374mm - Brake Mount (Fork): Short Reach Caliper (39mm-49mm) - Color: Black - Crown Race: 30 - Defined Color: Black - Front Axle: 10mm x 100mm - Material: Steel - Offset: 50mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Tube Length (mm): 300 - Steerer Type: Straight - Weight: 773g (1-inch); 780g (1 1/8-inch) - Wheel Size: 700c
DVO Emerald Tapered 20-D 26
$1,775.00
- Air sprung with adjustable negative coil spring - Twin Tube open bath cartridge damper with Bottom Loader compression unit - Rebound, high and low speed compression external adjustability - Threadless aluminum steerer with 42mm 7000 series aluminum upper tubes - Carbon Torsion Arch increases stiffness by 25% - 36mm lower legs with forged magnesium 20x110mm dropouts - 74mm Post-Mount, 203mm disc brake only
DVO Emerald Tapered 20-D 27.5
$1,895.00
- Air sprung with adjustable negative coil spring - Twin Tube open bath cartridge damper with Bottom Loader compression unit - Rebound, high and low speed compression external adjustability - Threadless aluminum steerer with 42mm 7000 series aluminum upper tubes - Carbon Torsion Arch increases stiffness by 25% - 36mm lower legs with forged magnesium 20x110mm dropouts - 74mm Post-Mount, 203mm disc brake only
DVO Jade Coil Shock
$585.00
- Compression loader damper unit with bladder for amazing small bump compliance and no stiction off the top - Externally adjustable rebound and high/low speed compression - Shock body cooling fins keep things running cool - Spring and mounting hardware not included, must be purchased separately - Adjustments: high speed compression, low speed compression, rebound, spring preload - 425 grams
Bontrager Haru Carbon Fatbike Fork
$399.99
Up your game with this all-Carbon rigid fat bike fork. Fitting up to 4.8" tires with a 26" wheel or 3.0" with a 27.5", this weapon will put your fat bike on the diet it deserves. • Full OCLV carbon construction with tapered 1-1/8-1.5" headtube 51mm offset • Accepts post mount brakes, up to 210mm max rotor size • 490mm axle-to-crown length, fits up to 26 x 4.8" or 27.5 X 3.0" tires • Includes 150x15mm thru-axle and carbon compression steerer plug • Carbon armor replaceable dropout guards
3T Luteus Team
$549.99
3T's Luteus Team is an all-carbon cyclocross fork designed for use with disc brakes. It features include a tapered steerer and aluminum-faced fork ends for precise handling and simple wheel changes. It supports brake calipers for use with standard 160mm brake rotors. The left fork blade is reinforced at the brake mounting pillars to compensate for the stresses imparted by disc braking. On its outer face, there is a recessed channel with two integrated fixing points for tidy brake cable/hose management. Plus, the fork ends face forwards and have aluminum inserts to better resist the lateral stresses transmitted through the hub by rough terrain.
Odyssey R25 Fork
$134.99 - $154.99
Odyssey's 41-Thermal forks quickly established a reputation for strength and quality when they originally introduced them in 1999, and they have since gone on to change the standards that all forks are judged by. The new R-Series forks continue this tradition. FEATURES - Fully redesigned. - Laboratory tested and team proven. - New, custom, seamless, tapered, butted and specially formed leg tube shaping for improved grind and guard clearance. - All-new steerer tube design improves fatigue strength and includes a built-in, integrated, lower headset seat race. - New, optimized, 4mm dropout shape for grind and peg clearance. - Updated 7075-T6 pre-load bolt - Proven 41-Thermal® processed 4130 chromoly - Legendary lifetime replacement warranty SPECS - 25mm traditional offset - 3/8” axle slots only Starting at 1lb 15.2oz (885 grams)
Odyssey R32 Fork
$134.99 - $154.99
Odyssey's 41-Thermal forks quickly established a reputation for strength and quality when they originally introduced them in 1999, and they have since gone on to change the standards that all forks are judged by. Their new R-Series forks continue this tradition. FEATURES - Fully redesigned. - Laboratory tested and team proven. - New, custom, seamless, tapered, butted and specially formed leg tube shaping for improved grind and guard clearance. - All-new steerer tube design improves fatigue strength and includes a built-in, integrated, lower headset seat race. - New, optimized, 4mm dropout shape for grind and peg clearance. - Updated 7075-T6 pre-load bolt - Proven 41-Thermal® processed 4130 chromoly - Legendary lifetime replacement warranty SPECS - 32mm traditional offset - 3/8” axle slots only Starting at 1lb 15.2oz (885 grams)
Dimension 1-Inch Threaded 700c Road Fork
$79.99
Dimension Road Forks are not intended for aggressive riding, stunt riding or road racing. - Forged dropouts with eyelets, welded unicrown construction - Designed for short-reach caliper brakes - 25 x 14mm tapered oval blades - Axle to Crown Length: 374mm - Brake Mount (Fork): Short Reach Caliper (39mm-49mm) - Crown Race: 26 - Front Axle: 10mm x 100mm - Material: Steel - Offset: 50mm - S.H.I.S. Stem Clamp Diameter: 25.4-24 tpi Quill - Steerer Tube Length (mm): 170 - Steerer Type: Straight - Weight: 692g - Wheel Size: 700c
Page 1 of 1